How to operate the stone cutting machine correctly

Stone cutting machines are widely used in the industry and are favored by customers. The safety of mechanical operation is a problem worthy of our attention and has important significance for mechanical production. So how to safely operate stone cutting machines? We will analyze and explain for you



1. Operators must have common sense of mechanical and electrical appliances, and remember to wear insulating gloves during operation



2. When cutting the inclined plane or groove, it is necessary to tilt the head of the machine. First, lift the head to the upper part by rotating the fan up and down, and then loosen the bolts on the inclined head. To prevent the head from falling suddenly during operation, hold the head with your hands when loosening the bolts



3. Before starting the stone cutting machine, be sure to check whether the bolts and nuts of each part are loose, check whether the power supply and wiring are leaking, and check whether the saw blade is placed in the same direction as the arrow of the protective cover. Only after inspection can you start the machine



4. Remember to check and maintain the machine regularly during use. The traveling shaft, main bearing parts and bearing parts of the manual feeding device under the workbench should be checked regularly, dirt should be cleaned and some grease should be added. If there is noise or abnormal cooperation during work, stop the machine for inspection in time, and then start the machine for use after removing the abnormal situation